Useful ideas

How to remove mold on the walls in the apartment: folk methods and professional tools

Pin
Send
Share
Send
Send


The question of how to remove mold on the walls in the apartment, sooner or later begins to worry every housewife. This is an unpleasant phenomenon, spoiling not only the look of the room, but also causing significant harm to the health of the household, needs to be removed immediately.

What is dangerous mold and fungus, which of the methods will be more effective - a professional tool or folk methods and what should be done to prevent the appearance of mold?

On sale there will always be funds for the treatment of lined walls with antifungal effect. You can prefer them and simple folk remedies

The causes of mold on the walls of the apartment and its harm to the body

Before you figure out how to treat the walls of the mold, you need to understand what constitutes a mold. A fungus that develops from airborne spores and appears in rooms with high humidity and insufficient ventilation can be considered a serious danger. Since high humidity is necessary for its occurrence, black spots most often appear in bathrooms, in kitchens, in apartments on the first or top floors. You can find a fungus anywhere: on air conditioner filters and in washing machines, on window frames and slopes, but walls are a favorite place for mold.

Take care to install a forced draft in the bathroom. Warm humid air - almost a guarantee of mold

The drum and sealing parts of the washing machine dry slowly after washing. Periodically clean them by hand, and always keep the washing machine ajar

FACT! The abundance of plants that love moisture and need frequent watering can also trigger mold in the room. Experts recommend not to abuse such greening of the apartment.

Mold on the walls of the apartment may appear due to the abundance of indoor plants. They will be the first to suffer.

The emerging mold in the house is the result of illiterate construction, poorly functioning ventilation systems and high humidity. That is why getting rid of the fungus in the room is a whole complex of works to eliminate all causes. The fungus washed from the walls will quickly return if the same humidity and temperature conditions are maintained in the room.

Mold often appears on shower curtains, and from there spreads through the bathroom. Because they need to be regularly washed with a sponge and soapy water (or washed, if they are not PVC)

TIP! It is not enough just to know how to deal with mold, because it is also necessary to protect the house from the appearance of fungal growths in the future. Therefore, preventive measures should be considered part of the overall complex work on the fight against fungus.

Mold often appears in the corners, behind baseboards and around windows. Wall cladding material has little effect on this.

Black mold (Aspergillus niger) will inevitably appear if the kitchen is not well cleaned. Leftovers quickly catch it

Black mold spores under an electron microscope with a 2000-fold increase (colors do not correspond to reality, are present for clarity)

In order to begin the process of getting rid of mold plaque, it is enough just to get acquainted with the list of probable diseases that face “communication” with the air filled with disputes:

  • Allergies and asthma.
  • Dermatitis.
  • Respiratory diseases: bronchitis and laryngitis.

A painful condition like a cold or an allergic attack may well be caused by spores of the fungus in the air.

  • Skin diseases: dermatitis, eczema.
  • Stomatitis, conjunctivitis and other.

Popular and professional methods of dealing with mold on the walls

When it comes to how to get rid of the fungus and mold that settled on the walls, ordinary people prefer to focus on popular methods. Their effectiveness has been tested over the years of everyday everyday experience, which, however, does not exclude the possibility of insufficient results.

  • Mold in the bathroom and any other room can be removed with vinegar, which effectively cleans the surface of the walls from fungal formations. The affected surface is wiped or sprayed with vinegar, then wiped with water, and the room is ventilated to eliminate the pungent smell.

Ordinary table vinegar fights mold very well

  • The classic antibacterial and antifungal agent is hydrogen peroxide. Everyone knows what to do with such a solution: coated surfaces should be treated with a 3% solution at intervals of several days - to fix the result. In a similar way, ammonia is used, diluted in half with water, but its use is effective only if smooth surfaces are affected - tiles, plastic or glass.

Keep hydrogen peroxide in the bathroom at all times. But keep in mind at the same time that the capacity for it should be from dark glass, and better - opaque. Capacity from time to time needs to be refilled - hydrogen peroxide eventually decomposes into water and atomic oxygen and loses all its properties.

  • A solution of one spoon of soda diluted in a glass of water is also considered a worthy remedy. At the same time, the soda is absolutely safe and does not need thorough rinsing of the surface after application.

The fungus stops multiplying in an alkaline environment, which can be used by washing contaminated surfaces with a solution of baking soda

  • No less effective is the use of bleach or any cleaning agent with a bleaching element. The aggressive agent is diluted with water in a ratio of 1: 3, after which it is applied to the infected surface with a stiff brush. After using the surface, rinse thoroughly and air the room until the smell is completely gone.

Bleach, for example, is diluted with the well-known “Whiteness” with water in a ratio of 1: 3 and we get antifungal agent for tile processing

Herbal remedies for mold are useless. The only essential oil that inhibits mold growth is monarda oil. It can be added to the aroma lamp

If none of the listed folk methods proved to be sufficiently effective, experts recommend to stay on professional tools that guarantee the disposal of mold once and for all. In this case, the surface treatment takes place in several stages:

Frequent washing of the walls in the bathroom and kitchen is a good way to prevent mold, since an imperceptible, not completely visible to the eye, accumulates over the walls with time - a favorable environment for mold

The surfaces near the contaminated walls must also be thoroughly cleaned, as the mold spores spread quite far away.

Knowing how to remove mold with the help of folk and special means, one can not only fight, but also conquer the fungus, permanently getting rid of unpleasant plaque on the walls.

If the problem of mold has already appeared in your apartment, the next time you buy wallpaper, pay attention to their special labeling indicating resistance to the mold (mold proof or other, as advised by a store consultant)

Preventing the occurrence of mold - the guarantee of health of households

Periodically inspect for mold need every house and apartment

After the owners of the apartment made a decision on how to process the walls, and the visual manifestation of the fungus was eliminated, it becomes necessary to create conditions that do not provoke the appearance of new fungal formations on the walls. So that the black mold does not return to the walls of the rooms, you should:

  • Check plastic windows for tightness. Ventilation valves on the windows will not allow the room to lose warm air, but guarantee adequate ventilation of the room.

If you find mold on bamboo curtains - remove them and just wash them with soapy water. After complete drying, you can install them back.

If you have wooden windows, doors, slopes - periodically check the integrity of their coverage. If necessary, coat them with fresh paint.

TIP! To protect window openings from moisture that appears due to frequent ventilation, you can treat them with hydrophobic paints.

  • The walls, which were affected by fungal spores, should not have furniture. Experts, on the contrary, recommend to ensure free access of air to all surfaces and corners of the room.

Attic and corner rooms most often suffer from mold on the walls. They need the most thorough forced ventilation. Wall insulation should be carried out only outside! Internal warming will only increase the chances of mold.

  • Airing should be the norm, and slightly open or open windows and air vents should help make the air in the rooms cleaner.
  • On exposed surfaces, prophylactic treatment should be carried out with special antimicrobial sprays or anti-mold paints.

In addition to tile, in western countries, budget finishes for bathroom walls with plastic panels are common. The absence of joints and a smooth washable surface - the least susceptible to mold (but you should remember about the pre-treatment of the walls on which such panels are mounted)

  • In addition to interior work in the room, it is important to carry out external prophylaxis, that is, to carefully isolate the joints between the panels, to provide waterproofing of the external walls and an adequate drain. In apartment buildings, this should be a service company.

To prevent mold in rainwater disposal systems, they should be periodically cleaned from leaves.

An apartment or private house, plastic or wood siding, is equally susceptible to the appearance of mold. Therefore, its prevention should be carried out both inside and outside

Fighting mold should be not only inside but also outside the room, conducting a whole range of activities that will protect the apartment from the appearance of fungus in the future. Despite the complexity and duration of getting rid of gray or black spots, it is necessary to remove the fungus, since its harm to health is palpable and substantial.

Houses (both private and multi-unit), located close to any water bodies and shaded by trees, almost guaranteed to attack the mold. Prevention they need the most thorough

Furniture for balconies and terraces is better to choose from synthetic materials - it is easy and quick to clean

The appearance of mold in the pantry, dressing room and kitchen cabinets will be warned by special packages, with silica gel or other drying fillers.

A source

Pin
Send
Share
Send
Send